- Joined
- 11 Jan 2004
- Messages
- 42,722
- Reaction score
- 2,630
- Country
Eeeh, them were the days!When helping me old dad (electrician), he used to hold the ladder upright, and I'd climb up out to untangle cables etc at the end of tree branches.
Eeeh, them were the days!When helping me old dad (electrician), he used to hold the ladder upright, and I'd climb up out to untangle cables etc at the end of tree branches.
Eh?6) Resting a ladder on a gutter is a no-no.
@cuboid
The following comments are meant as constructive criticism with the hope that they stop you before you do yourself some damage.
You have repeatedly asked questions about ladders & towers in a couple of the forums on this site, you've been given good advice from posters who have experience of working at heights but you seem intent on ignoring them.
You seem to have very little understanding of how to work safely at height - this last set of photos look like an accident waiting to happen.
1) Tower assembly is incorrect and would fail any site inspection as it's potentially dangerous to you and people on the ground.
2) The use of a ladder propped against a tower is a fundamental no-no.
3) Your tie-in's are neither use nor ornament.
4) One of the ladders you are using has seen better days
5) You ladder angle looks wrong (not withstanding it's against a tower)
6) Resting a ladder on a gutter is a no-no.
7) I dread to think how you plan to transition from the ladder to the tower platform.
Please take some time to assess if you really understand what you are doing and how you could do it better - a number of courses have already been suggested.
If you're really lucky, when you fall from height you break something and recover, if you're unlucky, you don't.
If you had taken earlier advice then you wouldn't have done this in the first placeThxs for pointing out ladder against Tower mistake,
Well either learn to tie knots or better still use ratchet straps.a constructive comment would be how to do it.
One of the few rungs visible looks damaged.What's wrong with other ladder? A bit of paint doesn't make a trade Titan Classic ladder a bad ladder. It's a great ladder.
Standoff and tied in at the top.So how would you put a ladder against a gutter then when getting on a roof?
Eh?
What do you do, hover?
You just go up with a chunk of 100mm x 50mm timber and wedge it in the gutter.
So you do put it against the gutter.Standoff and tied in at the top.
Eh?And pray no-one falls, otherwise you (as the employer) are fooked.
with a standoff?So you do put it against the gutter.
Obvs. And tied if you fancy it.with a standoff?
Bit silly to say this really.6) Resting a ladder on a gutter is a no-no.
Use a stand off.I wonder what Brigs alternative is.....?
If you had taken earlier advice then you wouldn't have done this in the first place
Well either learn to tie knots or better still use ratchet straps.
One of the few rungs visible looks damaged.
Standoff and tied in at the top.
As I said before, you have repeatedly asked questions about ladders & towers in a couple of the forums on this site, you've been given good advice from posters who have experience of working at heights but you seem intent on ignoring them. There are better ways to learn (and we all have to learn) but learning by making basic mistakes which put you (and others nearby) at personal risk isn't a good plan.