Baxi DuoTec Compact 24GA E133

Hakob · 12 Nov 2018

Hi dears.
I am from Armenia and i about 5 years have Baxi DuoTec Compact 24GA.
And about 3 days i have error E133
Our specialists check gas supply pressure, flames sensing electrode and Ionization electrode and cleaned both, they cleaned burner too, condensate cup is ok not full, Gas filter is clean.
I catch this error daily 9-10 times in other cases Boiler works normally.
And i see when it trying to do flame and it unsuccessful in that times in Gas meter numbers not switching it means it is not trying to receive gas for flame and i hear high volume of Ventilator which you can listen in video..
Auto calibration tried 3 times not helps.

Our specialist cant't help me, pls any suggestion and sorry for my bad English.
Here is video with issue:

Error log:
Е133
=18
000
03
F15 Sometmes F01
36C

Pls help!!

Hakob · 12 Nov 2018

pls any suggestion?

Hakob · 12 Nov 2018

Now it fully not starting always E133 in hot water too

ianmcd · 12 Nov 2018

your boiler is not getting gas either because of the supply or because of an integral part of the boiler, sorry but the site rules prevent me from advising anything further as it involves gas safety

Hakob · 12 Nov 2018

ianmcd said:
your boiler is not getting gas either because of the supply or because of an integral part of the boiler, sorry but the site rules prevent me from advising anything further as it involves gas safety

The technicans now going to change Gas Valve. Any else sugestion? Pls help me!!

ianmcd · 12 Nov 2018

That sounds like the most possible cause but can be other things

Hakob · 12 Nov 2018

ianmcd said:
That sounds like the most possible cause but can be other things

?? Pls tell me what to try if gas valve change not worked. Try to change flames sensing electrode and Ionization electrod?

Hakob · 12 Nov 2018

Gas valve didn't solve issue.
Any suggestions plsss

Hason · 12 Nov 2018

Get baxi out on a fixed price repair

Hakob · 12 Nov 2018

After again cleaning flames sensing electrode it begin works with sometimes error E133 tomorrow they will bring new flames sensing electrode and change and see what will be happen.
And they say in other case it will be all electronic micro scheme (plata). Is it possible?

Gasguru · 12 Nov 2018

You'll probably need Baxi...these were terrible boilers. AFAIR the gas valve change required a software update too.

Hakob · 12 Nov 2018

Gasguru said:
You'll probably need Baxi...these were terrible boilers. AFAIR the gas valve change required a software update too.

Sorry but in our country no other Specialists

Gasguru · 12 Nov 2018

Get a proper boiler...a manufacturer that has backup in Armenia.

Hakob · 12 Nov 2018

I didn't ask here what to buy. I have boiler and now have issue and will be good to receive suggestions.

dilalio · 12 Nov 2018

Hakob said:
Sorry but in our country no other Specialists

Then I think you're up the creek without a paddle

.

Wonder how that'll translate

diynot

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Are you a trade or supplier? You can create your listing free at DIYnot Local

Baxi DuoTec Compact 24GA E133

Similar threads