Scantronic 9800plus re programme
- Thread starter Glen bull
- Start date
Sponsored Links
Take the red and black out of the pcb for Tamper 1 and put wire like in .
Then try.
Then try.
Sponsored Links
Does the speaker start entry time sound or does it go into alarm sound.
Did the entry count down start or did it go into alarm sound?
You could have a faulty cable to front door ?
Can you take photo of door contact wiring.
Can you take photo of door contact wiring.
43 then 3 then tick 30 seconds entry
44 then 3 then tick 30 seconds exit.
From engineering 97 tick open front door what's in display? Should be 1 for front door.
44 then 3 then tick 30 seconds exit.
From engineering 97 tick open front door what's in display? Should be 1 for front door.
No 1 then
Photo for door contact
Still think faulty cable / contact
Need to see wiring
Photo for door contact
Still think faulty cable / contact
Need to see wiring
Told you to swop around the tamper pair and alarm pair ....you said alarm pair was blue and yellow ! It's wired red and black on the contact ...muppet ! Lol
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
