Enforcer Remote Keypad Set Status

M

MFRacing

Joined

10 Dec 2014

Messages

178

Reaction score

3

Location

West Yorkshire

Country

• 13 Mar 2019

• #1

Hi Guys,

Any way to get a enforcer remote keypad to light up the zone buttons red when set like you can on the main control panel? I know you can press the tick to get it to highlight which zones are set but would be good to see without pressing anything.

Thanks

 

A

Average Installer

Joined

23 Feb 2019

Messages

12

Reaction score

2

Country

• 13 Mar 2019

• #2

I’m going to guess probably not as that would drain the battery in keypad.

 

M

MFRacing

Joined

10 Dec 2014

Messages

178

Reaction score

3

Location

West Yorkshire

Country

• 14 Mar 2019

• #3

Good point!

 

E

Europlex

Joined

20 Nov 2007

Messages

2,954

Reaction score

268

Country

• 14 Mar 2019

• #4

"Good point!" not.

You would be showing every one what is set and not set all the time, blank panel only when set.

 

A

Average Installer

Joined

23 Feb 2019

Messages

12

Reaction score

2

Country

• 14 Mar 2019

• #5

Erm it is bad idea showing what set you have set. But if you have one on the landing and one in cupboard downstairs hidden, it’s pretty unlikely joe bloggs outside would be able to tell. It’s a bit like making the bell chirp or flash when set, that tells everyone the alarm is set. I have only one customer asked for this because they wanted to know what part set was set, they only had Away and Bed set, so it’s not hard to remember but they wanted it turned on.