Hotpoint ctd80 fault

Turkish1979 · 7 Jun 2019

Not sure if I'm fighting a lost cause but wondered if anyone could give us any advice.
Recently repaired our quite old condenser dryer(new heating element) and all has been working fine. Today the wife said he was spluttering and that it stopped. Had a look at it and the drums not turning at all and no hum from motor. All I here is a clicking sound from the board. Took the top and side off and belt is fine.
Does it sound like the motors gone or could it be a capicitor etc?

Any advice appreciated.

blup · 7 Jun 2019

I'm no expert but the absence of a hum suggests it is the motor rather than the capacitor, or maybe the pcb has failed in some way

Blup

jj4091 · 8 Jun 2019

Have you read the related threads below?

Turkish1979 · 8 Jun 2019

blup said:
I'm no expert but the absence of a hum suggests it is the motor rather than the capacitor, or maybe the pcb has failed in some way

Blup

That's what I thought.

blup · 8 Jun 2019

In which case given its age it might be time to replace it.

Blup

Turkish1979 · 8 Jun 2019

Cheers for the replys. Was hoping it was something simpler. Oh well, had a good number of years out of it

diynot

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Are you a trade or supplier? You can create your listing free at DIYnot Local

Hotpoint ctd80 fault

Turkish1979

blup

jj4091

Turkish1979

blup

Turkish1979

DIYnot Local

Similar threads