Additional meters on existing incoming supply

Joined
14 Jun 2013
Messages
61
Reaction score
1
Location
Surrey
Country
United Kingdom
Hi

Currently have 2 electric meters as in picture.
Adding an addional 3 flats to building, so will need an additional 3 meters.

Can I add another 3 meters to this supply?
So total of 5 meters off this incoming supply?

Thanks
Screenshot_20190613_210242.jpg
 
Sponsored Links
Thanks,
I know who to contact but wanted a heads ups beforehand.

Due to the incoming supply cable thickness I thought it may be possible to add an additional 3 meters.

The current large flat is being split in to 2 flats.
The extra power draw needed will be for
2 x studio flats.

The current meters are supplying the whole property, the only additional power needed is for 2 x studio flats, which are additions to the building.

I hope thats not confusing
 
wanted a heads ups beforehand.

What if anything is there to provide an effective Earth to the existing installation. ? The installation requires an Earth that can safely carry enough current in the event of a fault to operate a circuit breaker before the Earth wire starts to overheat.

There appears to be a thin bare wire attached to the sheath of the incomming cable. There are no apparent RCDs which means a fault in the installation would require that thin Earth ? wire to carry enough current to trip an over current device,
 
Sponsored Links
You need proper professional advice from your electrician on site, not from a load of unknown people with alcohol and drugs problems on an Internet forum.
You will need a registered electrician for all of this NOTIFIABLE electrical work.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top