Hi all,
I need to seal a load knots in some architrave and doors + lining and I’m not sure how to approach it.
I only want to use water based paints, primers, undercoats and finished. I already have some dulux trade quick dry wood primer undercoat 2in1 (water based). I plan to finish the architrave/doors in white gloss (water based).
I’ve done some searching and found people use Zinsser BIN. Can I use BIN on the knots and then paint the water based primer/undercoat (couldn’t find a clear answer on this) or can I use a white knotting solution?
My concern is that the BIN doesn’t say you can paint over it with water based paint, it says any oil or latex paint and the knotting solutions I have seen say not to be used under water based paint.
Note: all timber is new or bare
Hope someone can advise.
I need to seal a load knots in some architrave and doors + lining and I’m not sure how to approach it.
I only want to use water based paints, primers, undercoats and finished. I already have some dulux trade quick dry wood primer undercoat 2in1 (water based). I plan to finish the architrave/doors in white gloss (water based).
I’ve done some searching and found people use Zinsser BIN. Can I use BIN on the knots and then paint the water based primer/undercoat (couldn’t find a clear answer on this) or can I use a white knotting solution?
My concern is that the BIN doesn’t say you can paint over it with water based paint, it says any oil or latex paint and the knotting solutions I have seen say not to be used under water based paint.
Note: all timber is new or bare
Hope someone can advise.
Last edited: