Induction hob wiring issue help

Hi,

I have an issue with my induction hob, my kitchen fitters pulled the hob out whilst wired and overstretched it and pulled one wire loose.
I have attached photos.

I assume it goes on the free connector, the 3 free prongs.
But obviously cant just assume and stick on there, as there is a free prong on the live, neutral and earth, the hob wont power on its current state.

I have no instructions and cant seem to find the right ones on AEG website.

Id rather no call an electrician out (if I have to I will), when its only one wire needing clipping on.

If someone could point me in the right direction that would be greatly appreciated.

IF T2 is linked to T2 by a strap AND the Brown in the supply cable is fited to T1 then the loose Orange will ( 99% certain ) have come away from the tab on T1

The Orange supplies half the hob and the white supplies the other half

Thanks for your reply,

Not 100% sure what you mean by 'IF T2 is linked to T2 by a strap'

Did you mean if T1 is linked to T2 by a strap?

It seems to make sense that something would be wired to T1 as why bother having it there otherwise

Sorry That was a typo ( I must learn to check what I type )

A metal strap between T1 and T2

Great I will double check tonight and post back tomorrow.

Thanks again for your help

All working now, thanks for the help!

Gas camping stove is tucked away again