Shed from pallets

mark1a · 9 Aug 2019

I'm making a small 7x4.5x4 ft bike shed from only pallet wood. I'm making frame from lapped glued and screws slats so will be 3inch wide x 1.5in. is that ok? Also on the 4ft side and 7ft back sections how far should I be placing studs? Also being pallet wood what could I use to fill the nail holes with?

Cheers

foxhole · 9 Aug 2019

Or if you can get the larger pallets then you can get enough timber for the uprights from the 3x2” they are made with.
I used 1/2 ply on the rear of my pallet cupboard door , nail holes don’t need filling .

mark1a · 10 Aug 2019

Cheers foxhole unfortunately I cannot get the larger pallets or any pallets with 3ft length 3x2ish inch.

Deleted member 174758 · 10 Aug 2019

Try building sites. Plasterboard comes on 8 x 4 pallets and they can be awkward to get rid of

foxhole · 10 Aug 2019

JobAndKnock said:
Try building sites. Plasterboard comes on 8 x 4 pallets and they can be awkward to get rid of

Also plastics / signage companies use large pallets .

diynot

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Are you a trade or supplier? You can create your listing free at DIYnot Local

Shed from pallets

mark1a

foxhole

mark1a

Deleted member 174758

foxhole

DIYnot Local

Similar threads