Scantronic 9448+ Alarm

Hi Sparkymarka,

Entry/Exit, Zone 3 and Tamper is lit. All the rest (which are not connected) are unlit.

Thanks,
 
Sponsored Links
Ok what happens , if you do a walk test , 97 enter , should be long constant tone .... now open door it should go intermittent...
 
Just to prove a point ...can you do the walk test and remove both wires from the entry exit zone while holding in the tamper switch ....what happens ?
 
Sponsored Links
Yes but you will have to hold the tamper switch in or close it once the e/e zone is disconnected
 
So your saying when you do walk test ..97 enter with e/e wire removed ...and the lid closed or the tamper switch pressed in you still get constant tone and no lights showing on the panel ....yes ?
 
It’s faulty ....bin it or put it on zone 3 and make it e/e option 54....program zone 3 for chime
 
Ok, I thought as much. Thanks. Will be in touch when I have a new one fitted and let you all know the result.

Thanks for all your help.
 
More further info. When I disconnect the switch at the door (zone wires only) touch them together and then separate them I get the chime as though the door has been opened. So it must definitely be the switch.
 
D

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
You must log in or register to reply here.
Sponsored Links

Similar threads

G
scantronic 9448+
Replies
1
Views
1K
sparkymarka
sparkymarka
N
Scantronic 9448+ alarm
Replies
2
Views
2K
nalle59
N
S
Scantronic 9448
Replies
5
Views
2K
siterly
S
D
Scantronics 9448
Replies
8
Views
7K
breezer
B
S
Scantronic 9448+ and keyboard 9427
Replies
1
Views
2K
sparkymarka
sparkymarka
Back
Top