Self-build Small Extension

I'm capable of producing drawings showing the face of each wall (where the windows, doors, etc. will be), the roof and pitch but nothing technical. Sounds like producing a drawing/plan is something I could do for this.
:!: a drawing of a sort maybe.
I use Autocad at work and there are people in my department who have used it for 25+ years.
it isn't just a question of being able to use Autocad ,it's also the knowledge of building construction.
I’ve used private and council for building control in the past and found both to be fine
Me as well,but perhaps some private inspectors going bust recently is a concern.
 
Sponsored Links
Me as well,but perhaps some private inspectors going bust recently is a concern.
Anyone actually seen that happen, mid-project? Surely their previous inspections need to stand rather than going back to square 1 with the council?
 
Thanks all it's great to get opinions and experiences from people. As you'll gather I've never gone through the BCO for something like this. The only time I have experienced their staff was when having a stove installation inspected post-completion. I just sent a form to the council and an inspector came out, wrote a few things down while checking and measuring and he was gone. Then I got my certificate.

The construction and design of the build is probably fairly simple as extensions go so my gut feeling is to go for full plans submission as I can't see anything changing once we've decided the design of the build. I did have a discussion with the other half last night as to whether we make it the full width of the house. We'd still only be coming out around 2 metres though as there is no intention to make this a large extension.

@Leofric - Understand now that there's more to the drawings. I just wanted to state what (fairly simple) level of skill I have with Autocad. As I say I wasn't sure what they wanted to see in them.
 
Sponsored Links
I did have a discussion with the other half last night as to whether we make it the full width of the house. We'd still only be coming out around 2 metres though as there is no intention to make this a large extension

That would be my preference....otherwise you just create a bit of rather shady terrace.

Obviously there is cost to consider........

If you want to be cheeky, go onto the planning portal, search in your area for an application for an extension, then download building regulation drawings. Itll give you an example of the details and annotation. Obviously it wont be specific to your project, but a lot of what is written in b/regs drawings is standard spec that is cut n paste (architects will hate me saying.....).
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top