FFS! is it magnetic or not, did it spark when cutting, was there a lot of dust,how thick is the wall
Adjusting metal soil pipe
- Thread starter Jupiter01
- Start date
Sponsored Links
Is it the same material right through the 5mm thickness?
Sponsored Links
galvanised steel then, no worry about asbestos
I must admit when I first saw the fibres on the cutout asbestos did cross my mind but thought more likely to be off gloves or other item of clothing
I must admit when I first saw the fibres on the cutout asbestos did cross my mind but thought more likely to be off gloves or other item of clothing
Christ, that's a new one on me. Must have had some left over water main, so used it for soil pipes.
Looks like a 3" ( 82mm ) Osma soil bend, post a pic of the upstairs vent pipe as it is now.
I had a $hit day today... Just sayin'
Guys, I need some help with the smaller section of this soil pipe please. The bane of my life!
As seen from this image, the 110mm soil pipe then connects to this smaller grey pipe which acts as the vent. Eventually pops out of my roof.
I went to Wolsley on the weekend to get a couple of elbows and adaptor which goes from 85mm (measured externally) to 110mm and they wanted £60. This seemed extortionate!
Is there something I could do cheaply given that its only for air and will be boxed up?
I can see online suppliers for 82mm pipe but I am concerned that it may not fit when it arrives...
As seen from this image, the 110mm soil pipe then connects to this smaller grey pipe which acts as the vent. Eventually pops out of my roof.
I went to Wolsley on the weekend to get a couple of elbows and adaptor which goes from 85mm (measured externally) to 110mm and they wanted £60. This seemed extortionate!
Is there something I could do cheaply given that its only for air and will be boxed up?
I can see online suppliers for 82mm pipe but I am concerned that it may not fit when it arrives...
Do you still have some 110mm soil pipe left over?, use a bit of that and two 110mm 45 degree bends and slip the 110mm pipe
over the 3" steel pipe and seal the gap. 85mm pipe and fittings have always been more expensive than 110mm.
over the 3" steel pipe and seal the gap. 85mm pipe and fittings have always been more expensive than 110mm.
- Joined
- 22 Jan 2007
- Messages
- 14,291
- Reaction score
- 2,080
- Country
Yes, something like this https://www.drainagecentral.co.uk/Flexible-Coupler-Plastic-to-Plastic-110mm-x-82mm-BFC44
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
