RSJ expansion?

Joined
27 Sep 2016
Messages
6,209
Reaction score
708
Country
United Kingdom
Should there ve an expansion gap left when fitting an RSJ in a loft conversion?

The steel beam will be 5.88 meters long, but there was no mention of an expansion gap in the structural calc or plans.

Should i leave an expansion gap and if so how much at each end?

Thanks in advance
 
Sponsored Links
I don't think your house will have such extreme changes of temperature to affect a 6 metre rsj.
Unless you plan to keep the conversion without a roof for sky gazing...
 
Lol no we plan on keeping the roof in place!

Its going to be 2 rooms and a shower room, so only heat will becoming from radiators.
 
A 6m steel beam will expand less than 1/10th of a millimeter for each deg. C increase in temperature.
So unless you install it on a freezing cold night, and then plan to operate a blast furnace in your loft, expansion will never be an issue.
 
Sponsored Links
I obviously don't know your loft situation but is
it a problem leaving a 'bit of a gap' at each end anyway :?:
 
I obviously don't know your loft situation but is
it a problem leaving a 'bit of a gap' at each end anyway :?:

I only have 100mm space if i take out one brick depth. The neighbours half of the party wall is literally 10mm away, so most i could get is 10mm expansion gap with the steel sitting on 100mm of steal base plate
 
Never heard any structural engineer talk about rsj expansion/contraction.
Wood moves a lot more.
 
Like Tony says it won't expand 10mm so if you have a 10mm gap each end anyway there won't be a problem .
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top