Thin spanner for reducer

Dylan T · 28 Oct 2019

Hi all -

I need to insert a brass 3/4" to 15mm reducer into a female pipe but the reducer's hex portion is too thin for a standard wrench. Is there some sort of thin spanner or tool that's required for this that I'm not aware of? Thanks (the gap is about 4mm).

oilboffin · 28 Oct 2019

Kamasa spammers are thin section.Bob

ianmcd · 28 Oct 2019

oilboffin said:
Kamasa spammers are thin section.Bob

Are they dyslexic Bob ? just teasing mate

lostinthelight · 28 Oct 2019

Dylan T said:
Hi all -

I need to insert a brass 3/4" to 15mm reducer into a female pipe but the reducer's hex portion is too thin for a standard wrench. Is there some sort of thin spanner or tool that's required for this that I'm not aware of? Thanks (the gap is about 4mm).

That what a grinder or grindstone is for

jammmy · 28 Oct 2019

These are thin.

https://www.screwfix.com/p/monument-tools-compression-fitting-spanner/82712

EddieM · 28 Oct 2019

something like this suit, other vendors are available.

Razor900 · 28 Oct 2019

Screw the 3/4” section in first then attach the 15mm to it.....

oilboffin · 28 Oct 2019

God I'm ****e on a computer

diynot

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Are you a trade or supplier? You can create your listing free at DIYnot Local

Thin spanner for reducer

Dylan T

Attachments

oilboffin

ianmcd

lostinthelight

jammmy

EddieM

Razor900

oilboffin

DIYnot Local

Similar threads