Ikea dishwasher valgjord

John Cliffe · 16 Nov 2019

Does anyone know how to run a diagnostic test cycle on an ikea valgjord dishwsher?

The water is cold yet I’ve tried, replaced and tested the main parts such as :

New temp sensors replaced
New pressure switch replaced
Heater element checked and continuity ok
Heater pump ok

I hear you need to run a test diagnostic cycle but don’t k ow how to?

conny · 16 Nov 2019

Does it not tell you in the manual?

sodthisforfun · 16 Nov 2019

https://www.ikea.com/au/en/manuals/valgjord-integrated-dishwasher__AA-1082427-1.pdf

John Cliffe · 16 Nov 2019

conny said:
Does it not tell you in the manual?

I have the manual but it doesn’t tell you about ‘service mode’ but thanks for answering.

I’ve read that you may need to run in diagnostic mode if you change the heater element to reset it.

I’ve not changed it but had it all in bits and tested it...hence the machine may think it’s new?

John Cliffe · 16 Nov 2019

sodthisforfun said:
https://www.ikea.com/au/en/manuals/valgjord-integrated-dishwasher__AA-1082427-1.pdf

I have it thanks but doesn’t give me the info.

I’ve basically changed and checked everything that I would assume. Heater issue, all seems fine but still runs cold!!

conny · 16 Nov 2019

I think it may be best to contact the service desk. I've had a read through the manual, and also the one in 'sodthisforfuns' link but neither of them indicate how to run a diagnostics programme. It may need to be done by a service engineer unfortunately.

diynot

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Are you a trade or supplier? You can create your listing free at DIYnot Local

Ikea dishwasher valgjord

John Cliffe

conny

sodthisforfun

John Cliffe

John Cliffe

conny

DIYnot Local

Similar threads