Extractor fan isn't working?
- Thread starter Keitai
- Start date
Sponsored Links
Its a Cooke and Lewis Kitchen Fan, ( CLCGS 60) sold by B & Q
https://www.diy.com/departments/kitchen/kitchen-appliances/cooker-hoods/DIY824231.cat
https://www.diy.com/departments/kitchen/kitchen-appliances/cooker-hoods/DIY824231.cat
Filter is in the first photo.
Spares here
https://www.ransomspares.co.uk/parts/brands/howden/cooker-hoods/hja2420/
Last edited:
How do you know this?
I called the company from sticker on fan. They said my local supplier address. I called their engineer. He said it would cost £140 just for motor and £170 for whole unit and he suggested replacing the whole unit. Shall just buy this and fit myself?
Sponsored Links
I think I would. But not with another Cooke and Lewis
Take the old one off first, measure your gap, position of electrical outlet, position and size of exhaust duct (if any)
I have been pleased with Elica extractor hoods. But email and ask for their glossy brochure as the website is awful to navigate. Look at noise in db, and extraction rate in cubic metres per hour. There may be other good makes
Take the old one off first, measure your gap, position of electrical outlet, position and size of exhaust duct (if any)
I have been pleased with Elica extractor hoods. But email and ask for their glossy brochure as the website is awful to navigate. Look at noise in db, and extraction rate in cubic metres per hour. There may be other good makes
- Joined
- 31 Oct 2019
- Messages
- 1,423
- Reaction score
- 225
- Country
I'm wondering where the rest of the two prongs of the lightbulb are? Op where you a little forceful when you unscrewed the bulb? I ask cause without the rest the bulb wouldn't have stayed in the holder.
I get the feeling it's going to be cheaper , easier and quicker to replace the entire hood , they are not that expensive. (Especially if you're not electrically minded and don't have test gear)
I get the feeling it's going to be cheaper , easier and quicker to replace the entire hood , they are not that expensive. (Especially if you're not electrically minded and don't have test gear)
- Joined
- 31 Oct 2019
- Messages
- 1,423
- Reaction score
- 225
- Country
It's been used as a recirculating extractor only.
There should be a carbon filter fitted in it which removes the smells has this ever been changed?
There should be a carbon filter fitted in it which removes the smells has this ever been changed?
Nah. To be honest I just saw the metal mesh thing and inside the motor. Dont know if there was one of those
Been onto the property management people to get s duct hole fitted. Preferably through roof if not wall.
- Joined
- 31 Oct 2019
- Messages
- 1,423
- Reaction score
- 225
- Country
If you are leasehold you may find that the freeholder doesn't want you punching holes through the roof or wall.
Roof would certainly be the better way to hide the pipe and not have any boxing in.
If no luck then you can also use it as a recirculating extractor just need to make sure a carbon filter is fitted as it's a little pointless using the extractor without it!
Roof would certainly be the better way to hide the pipe and not have any boxing in.
If no luck then you can also use it as a recirculating extractor just need to make sure a carbon filter is fitted as it's a little pointless using the extractor without it!
Are you leasehold/owner or do you rent? If renting then it is landlords responsibility to repair/replace.
I bought same extractor, (Cooke & Lewis), from B&Q about 4 years ago and had no problems with it. Cost £60 if I remember correctly though I doubt they would do spares for it. If it's your responsibility then simply buy a new one but do fit an outlet for maximum efficiency.
I bought same extractor, (Cooke & Lewis), from B&Q about 4 years ago and had no problems with it. Cost £60 if I remember correctly though I doubt they would do spares for it. If it's your responsibility then simply buy a new one but do fit an outlet for maximum efficiency.
Well I'm not allowed to go through ceiling so I'll have to run the duct along the top to the wall on same side as window and get a hole drilled there. I could box the ducting in. Is it worth it? Will it look crap and put people off when I sell it? Or get another one which recirculated the air?
- Joined
- 31 Oct 2019
- Messages
- 1,423
- Reaction score
- 225
- Country
If you go for a box in then because you have coving it's going to stick out a mile and look crap , you may have to remove all your coving to disguise it.
What is the other side of the wall the fan is on?
I personally would stick with a recirculating fan , not ideal I know
What is the other side of the wall the fan is on?
I personally would stick with a recirculating fan , not ideal I know
I observe that it's in a kitchen.
Fit some kitchen wall cabinets and nobody will see the duct.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
