PR5208 rev1.0 is on base of unit. See photo.
Any help would be much appreciated. Thank you.
Eurosec Alarm
- Thread starter Tiggs888
- Start date
PR5208 rev1.0 is on base of unit. See photo.
Any help would be much appreciated. Thank you.
Sponsored Links
User default 5678 if not been changed by installer.
If code list then you will need to default control panel to reset user code.
If code list then you will need to default control panel to reset user code.
Thanks, but how do i do that...i am not teccie and am of the point and press generation.....what do i press?
Is it reset, followed by 5678?......and will alarm go off if wrong?....have just moved in to very quiet area, so dont want to upset neighbours this early!
Is it reset, followed by 5678?......and will alarm go off if wrong?....have just moved in to very quiet area, so dont want to upset neighbours this early!
Google CP8L for user manual
Sponsored Links
5678 full will set alarm if that is the code.
If it is not the code then nothing will happen,but DO NOT keep trying different code numbers as this will cause a keypad tamper fault and set off the internal sounder.
If it is not the code then nothing will happen,but DO NOT keep trying different code numbers as this will cause a keypad tamper fault and set off the internal sounder.
Ok lets assume 5678 set worked. When i come back inside, what do i press to prevent alarm sounding .....presumably 5678 and ? what button.
And how do i change this to one of my own? Sparkymarka above pointed me towards CP8L but is this the link to the manual i need?
Sorry to be so needy and ignorant but never used before so no real idea .
Thanks for sticking with me.
And how do i change this to one of my own? Sparkymarka above pointed me towards CP8L but is this the link to the manual i need?
Sorry to be so needy and ignorant but never used before so no real idea .
Thanks for sticking with me.
Yes
Code number will turn off system
The keypad lid tell you how to set and unset set system
Code number will turn off system
The keypad lid tell you how to set and unset set system
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
