Wood protection

Hey, as I've said in previous posts I'm building a bike shed from pallets. This time I'd like to know what's best protection from the 2 links below or other suggestions. 2 sides I will most like not be able to protect very well but will try to coat again in couple years .

https://www.wickes.co.uk/Wickes-Shed+Fence-Creocote---Light-20L/p/107374

https://www.toolstation.com/wood-protective-treatment-preserver-5l/p68513

Rather it was clear but looking for bes

t protection and coverage to cost

The Baratine will offer more protection, though it is not a finish, only a preparatory treatment.

Creosote substitutes had the fungicide/insecticides removed some years ago and are no longer the treatment they once were. Consider them more like a cheap oil finish.

with the Barratine, it would be better to apply it (remembering to thoroughly soak end grain and anything in contact with the ground) and once thoroughly dry to apply some kind of secondary finish over the top, which will help it to shed water. Belts and braces, especially with pallet wood which likely to be susceptible to degradation pretty quickly otherwise.

Decking oil is a cheap alternative , Keeps all my fencing in good condition and soaks in well.

Cheers guys.

I just seen this
https://www.amazon.co.uk/Decking-Li...ar&qid=1582195735&sprefix=decking+oil&sr=8-12

Any good? Or do I bite and buy 2 or 3 cans of 5l decking oil or wood treatment