The brush symbol light on my fully integrated Bosch SMV50C00GB/07 dishwasher was flashing after the wash and the items were still dirty. I inspected the inlet & outlet pipes for blockages, cleaned filters, examined waste water pump – no obstructions, impeller rotating OK. I ran the machine again this time 5 beeps when it came to drain water tap symbol flashing, the water extraction pump kept running on and would not stop except by resetting machine. Ran the machine a third time, seemed to complete full wash dishes seemed clean, no residual water but water tap light illuminated.
Similar problems seem to point to the reed Switch I have replaced the reed switch but the water tap light is still illumiated after running a cycle. I'm Stumped. Any Ideas
Similar problems seem to point to the reed Switch I have replaced the reed switch but the water tap light is still illumiated after running a cycle. I'm Stumped. Any Ideas