Texecom Premier Elite - COMIP protocol issue

Titodz · 25 Mar 2020

I have a Premier 48 on firmware 5.0, with a ComIP which I couldn't configure Montex and texbase on my local network without passing through WAN,

My PC address IP: 192.168.0.12/24
Texecom Premier Elite 48 address IP: 192.168.0.100/24
My gateway: 192.168.0.1/24

Any ideas?

tahnk you,

sparkymarka · 25 Mar 2020

What operating system you on your pc ?

Titodz · 25 Mar 2020

secureiam · 26 Mar 2020

Looks like you are fiddling settings you don't need to.

I havent used Montex and Texbase in a very long time

Titodz · 26 Mar 2020

Which details i don't need to set, I have more than a week trying to lunch a local notifications system, i took a Montex and Texbase as an example, till now results.

secureiam · 26 Mar 2020

start with the default values and change nothing

point the panel to the right address

its been a while I would have to have a look at my notes if your at home now pm me and Ill take a look not doing anything during lockdown

secureiam · 26 Mar 2020

secondly I would use separate ports for the panel and montex

so if panel on connection 10001, have the pc on 10002 and wrt to the arc send it 10002

Titodz · 27 Mar 2020

A big thanks to Mr "SecureIam" which helped me remotely to solve the issue.

littlephil · 25 Jul 2022

I have come accross the same problem, do you mind sharing how you got it sorted? My setup is pretty much the same. Thanks

diynot

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Are you a trade or supplier? You can create your listing free at DIYnot Local

Texecom Premier Elite - COMIP protocol issue

Titodz

Attachments

sparkymarka

Titodz

secureiam

Titodz

secureiam

secureiam

Attachments

Titodz

littlephil

DIYnot Local

Similar threads