Bosch Classixx washer

Peter.N. · 1 Apr 2020

Mine has ceased working, the lights are on but no movement from the motor. The last time this happened about 7 or 8 years ago I found the brushes were worn and replaced them, this time they are OK though.

It has been suggested that the door switch is faulty although I have dismantled and cant see anything wrong but I don't really know how it works, its complicated. the switch contacts open and close when operated manually but there is a voltage drop across them of just under 0.6 volts which seems to suggest the have diodes in the circuit.

The switch is the old type retained with screws rather than pegs.

Any suggestions?

Thanks Peter.

footprints · 1 Apr 2020

Ours always needs a nudge with your knee on the door catch side to get it going.

Peter.N. · 1 Apr 2020

Tried hitting it at all angles to no avail. I could take a chance on replacing the switch but the screw type are not readily available, at least not here. There are some in Australia but with carriage they are expensive - if they can get here at all. Someone is advertising a secondhand one but are not replying to emails.

Any other common causes?

Peter

footprints · 1 Apr 2020

Nope a nudge is all I got!

Peter.N. · 1 Apr 2020

No I didn't break it. Tried it at all angles though.

Peter

assuhors · 1 Apr 2020

Do you have the Model number ENR Number.

Peter.N. · 1 Apr 2020

Will try to get it, have to get the machine out again.

Peter

Peter.N. · 2 Apr 2020

assuhors · 2 Apr 2020

The part number for the door lock if you haven't got it is 182154.

Peter.N. · 2 Apr 2020

OK thanks.

Peter

diynot

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Are you a trade or supplier? You can create your listing free at DIYnot Local

Bosch Classixx washer

Similar threads