Dishwasher not cleaning - taking a LONG time to finish

OM2 · 12 Apr 2020

Salt level is OK.

Just seen a youtube video:

The guy says you just need to replace the filter.

I checked the filter, to one side there is a tiny gap.

So... I can't believe that this TINY gap is what is causing the problem???

Is there anything else I should be doing to check?

Part ordered from Amazon anyway.
(I can cancel order if someone says I should do something else!!)

Thanks.

Diyisfun · 13 Apr 2020

When I used to have problems like this, it was usually the spray arm had blocked holes.

Mottie · 13 Apr 2020

Run it empty and open it up while it’s running to make sure the arms are revolving. If not check arm holes are not blocked as mentioned above - a small hole in the filter will allow food particles to get into the arms and block the holes. Also, run a really hot wash with a dishwasher cleaner to clear it out.

OM2 · 13 Apr 2020

Done all of those things.
Arms are revolving OK.
Thanks for the replies.

diynot

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Are you a trade or supplier? You can create your listing free at DIYnot Local

Dishwasher not cleaning - taking a LONG time to finish

OM2

Diyisfun

Mottie

OM2

DIYnot Local

Similar threads