my biasi boiler keeps running water that turns hot then cold due to the flame keeps going out also when i run the hot water the boiler egnigtes but then only sends out luke warm water can anyone give me any info on this please
my biasi boilers flame keeps going out
- Thread starter thomas500
- Start date
Sponsored Links
Its not very clear to me exactly what you are describing.
I think its most likely that you have a problem with the fan/APS system but this would normally require a CORGi engineer as they are parts of the combustion and safety interlocks.
Unless you were competent to work on those aspects I am unable to give you detailed advice.
Tony
I think its most likely that you have a problem with the fan/APS system but this would normally require a CORGi engineer as they are parts of the combustion and safety interlocks.
Unless you were competent to work on those aspects I am unable to give you detailed advice.
Tony
- Joined
- 7 Jan 2005
- Messages
- 94
- Reaction score
- 0
- Country
Tony was also correct when he indicated this was the answer to a somewhat similar fault. In our case on arrival at the boiler it was found the fan was not working suitable. This was fixed by cleaning and lubricating the fan.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
