Galaxy Flex flash Strobe on Set

AndyGarratt · 10 May 2020

Hi All,

Do you know if its possible to flash the external strobe when the system is set using a Galaxy Flex 100?

I do have the Trigger Module and considered setting a trigger on SET but would that would mean two connections to the SAB which I suspect would short each other?

Cheers, Andy

GalaxyGuy · 10 May 2020

Program a set and configure for pulse. Yes, you can combine the outputs at the panel side if you like. They are open collector pulled up to 12v. Ie. join two trigger outputs if they have the current capability. One programmed as strobe and the other as set pulsed.

GalaxyGuy · 10 May 2020

Just to add. If tying outputs, you may want to remove the pull up resistor links.

AndyGarratt · 11 May 2020

Great, i'll give it a go today, already moved the stroke to a trigger as the trigger was not strong enough for the Engineer hold of so should be a simple change

Thanks for your help as always!

diynot

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Are you a trade or supplier? You can create your listing free at DIYnot Local

Galaxy Flex flash Strobe on Set

AndyGarratt

GalaxyGuy

GalaxyGuy

AndyGarratt

DIYnot Local

Similar threads