Cheap panelling/board options for rough wc walls?

Joined
26 Nov 2011
Messages
413
Reaction score
28
Location
Somerset
Country
United Kingdom
We have a little toilet built into a rough lean to on the rear of our house.
The render is really old and bubbled/cracked in places.

It needs walls that are fairly uniform and able to take some paint.

I would rather attempt cement render than skimming plaster but wonder if there are some options for a cheap ish boarding over.
Rather not go in there to hack off all the current render....


Don't want to loose to much volume. Tiny space already.....

Single skin exterior wall on one side- is a bit damp.

Plastic, plaster board (edge joins only - no skim), some type of wood, or are there materials I am not considering?

I have some experience boarding areas with water resistant neat match (££££££), boarded quite a few fireplaces with supalux board.... And can imagine getting a satisfactory finish with float coat to the walls of I was to cement render it.....

Decisions, decisions....?
 
Sponsored Links
Chop the render off (treat yourself to on SDS drill with a stop chuck & a chisel), clean the pointing up & throw some external masonry paint at it.
If the render is failing outside then chop that off as well
 
Chop the render off (treat yourself to on SDS drill with a stop chuck & a chisel), clean the pointing up & throw some external masonry paint at it.
If the render is failing outside then chop that off as well

Thanks. Hadn't even considered that option . :D
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top