Wall cracks, garage conversion.

Joined
11 Feb 2007
Messages
30
Reaction score
0
Location
London
Country
United Kingdom
Hi all

Please see photos

Thinking of converting garage to bedroom and started exposing brickwork to have a look at the cracks.

Brick wall on the right is single and the brick wall on the left is double (external). This is a 1930s property.
Now at what point do those cracks become a concern? How big do they have to be? Is it worth doing anything with them or will they be ok for garage conversion?

Regards
 

Attachments

  • IMG_20200522_181122.jpg
    IMG_20200522_181122.jpg
    310 KB · Views: 356
  • IMG_20200522_181131.jpg
    IMG_20200522_181131.jpg
    506.4 KB · Views: 365
  • IMG_20200522_181141.jpg
    IMG_20200522_181141.jpg
    360 KB · Views: 341
Sponsored Links
Remove the plaster so you'll know how bad it is.
Frankly, looking at the pictures it's not bad, but needs investigating.
 
Thanks Johnny, i will remove the plaster to have a better look.
Looking at this last photo the crack seems to go all the way up.

IMG_20200523_080457.jpg
 
Sponsored Links
Cracks under the window are easily dealt with.
The one in the corner is due to bricks being laid wrongly, vertical joints too close.
Personally if the wall is solid and hasn't moved for years, i would brace the cracks with stainless steel and plaster over.
 
Thanks Johnny

Not sure how long cracks have not moved for as have only been in the property for 1 year.
In simple non builder terms what do you mean by brace the cracks with stainless steel and plaster over? I googled and found HeliBar which is a helical stainless steel reinforcing bar, is that what you mean?
 
For under windows yes.
Also for corners, although I would also brace it with rigid corner straps.
corner_diagram.jpg
 
Are there any indications of external cracks?

As for "stabilisation" go with any of the "Helifix" products, they all work, very well and there are several different systems for all sorts of cracks, i have specified most of them at one time or another.

Consider insulating the external wall on the internal side? if you have the space?

if plastering, apply stainless steel mesh over the cracks and plaster over?

Ken.
 
There doesn't seem to be any external cracks on the the rendering.

Yes my plan is to hopefully dpc/batten and 50mm insulation inside the external wall. Also cut a doorway where i have now exposed the brickwork on the right hand side wall as it leads to the kitchen.
 
If there are no external cracks showing, then it is safe to say that the crack is probably old and is not presently moving, just keep an eye on it.

Ken.
 
Brickwall under window now exposed.
I have a feeling the outside is probably the same but it looks ok as its rendered.

So should i put 3 helibars underneath the window at say 4-5 bricks apart?
Also put 1 helibar at the top of the right hand side wall where the door will be with bracket either side of wall?

Thanks
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top