aquatron 1 shower front cover

Joined
11 Jul 2020
Messages
3
Reaction score
0
Country
United Kingdom
hi all this my first post and im looking for help, i have an aquatronic 1 shower and have blown the pressure release device, so i need to replace the pressure release thing, now here is my problem, i cant see a way to get the front off the shower, the front cover has no screws or no visable way it comes off, im stumped, it must come off so i asume, can anyone help me please.
its driving me mad, its an easy fix if i can get the front off please help

steve
 
Sponsored Links
Thanks denso, having read through it and it’s the right shower it still mentions screws to undo on the front of the box cover and I can assure you there are no screws to undo so I’m a lot further on but still got the screw problem
 
Sponsored Links
Thanks denso, having read through it and it’s the right shower it still mentions screws to undo on the front of the box cover and I can assure you there are no screws to undo so I’m a lot further on but still got the screw problem

Page 3 of the PDF... Look at No.6 in the legend. There are 2 x cover fixings... From the top and bottom.
 
I think I’ve cracked it,found 1 screw locating the second and it should be plain sailing from there,thanks so much guys. I have a few mental health problems and was going off my nutt trying to figure this out , thanks denso for those instructions they were invaluable


Steve
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top