Bench drill

  • Thread starter Captain Nemesis
  • Start date
C

Captain Nemesis

Or drill press, or whatever they are called.

Would like to get one. I dont do metalwork or woodwork as a hobby, just DIY, but sometimes it would be useful to be able to drill perfectly vertical holes etc.

I was hoping to spend £100-ish. Ideally no more, but could go to a bit more than £100 if it really did get worthwhile superiority.

But much more than that I cant really justify.

Half the word and its brother seem to sell this:

15B899F5-C008-420C-A5D3-A232DA18EBA5-huge.jpg


in various guises. That's a Clarke, but I've seen what looks like the identical machine but with a different paint job and a different "maker's" stickers from countless "makers".

No doubt all churned out in the same factory in China.

Are they actually all the same?

Are they any good?

Would I be better spending my budget on a better quality but used jobby on eBay?

Should I not bother at all at my price point?

Am I right in thinking that I could put a Jacob type chuck into a machine with a Morse taper, as I don't got no taper drill bits and don't want to have to.
 
Sponsored Links
Captain Nemesis said:
Would I be better spending my budget on a better quality but used jobby on eBay?

Should I not bother at all at my price point?

Am I right in thinking that I could put a Jacob type chuck into a machine with a Morse taper, as I don't got no taper drill bits and don't want to have to.
Click to expand...
At £100 you won't get a second hand industrial type machine even on eBay unless it is completely knackered (try £200 and upwards, even for a lightweight such as a Startrite Mercury or British-built Record) . At your price point the DIY machines are all badged clones and are much of a muchness, so you may be better off sticking with a brand where it is easy to return a duff one. You won't need to put a chuck on the drill, AFAIK they all come with a 3 jaw chuck (often on an MT mandrel), although it probably won't be a Jacobs one (although their quality has also gone down the pan since they moved production to China)
 
Last edited by a moderator:
For what you need it for it will be fine. We’ve had one in our garage for about 10 years and it’s great, as you say, for drilling perfectly vertical holes.
 
I agree with mottie, for what you require it for would be a waste to get anything more expensive.
I have a dirty wet one and a dry one from lidl, the former along side the lathe for drilling metal and the latter , mainly for forstner bits and plug cutters for hiding screws in skirt,door linings,etc
 
Sponsored Links
I'm sure it would. Although I saw a less-than complimentary review of a Parkside model on YouTube. The laser lines crossed somewhere other than where the drill went.

But do I want to go into a supermarket for the sake of £60-odd?
 
Why would you want or even need a laser cross line on a drill press? Classic case if technology for the sake of it IMHO, not to mention a waste of money which would have been better spent elsewhere on the tool. Mark your hole position, strike with a centre punch and the work can be accurately located in the dimple (in metal). Woodwork bits have centre points which are easy to align onto a cross line.......
 
Last edited by a moderator:
Laser cross hairs on a pillar drill? I mean what is the point? A pillar drill by it's very nature allows slow precise alignment of the bit.
 
Definitely agree on lasers not being useful or good at this price point.

My frustration with Bench drills at this price point is not having a height adjustable drill plate using a 'rack and pinion' type handle. I seem to have to fight the 'slide collar' type to get them to the correct height and that frustrates me when I have several different sized objects to drill.

But saying that, for my infrequent use not sure that I would actually stump up the extra £100 for say this one (randomly selected):
https://www.toolstation.com/zipper-stb16t-630w-16mm-bench-drill-press-12-speeds/p52223

SFK
 
Last edited:
I have the same one from Aldi from 10 years ago. Lots of play in the shaft bearing, the movable plate/base bends/spring quite easily with too much pressure, but for lots of jobs its fine.
 
my BiL bought one and is pleased with it. He boasted to me that he fitted new bearings and a new motor to it to upgrade the quality.

hopefully he had them knocking about the workshop and did not buy them specially.
 
JohnD said:
hopefully he had them knocking about the workshop and did not buy them specially.
Click to expand...
Does he have a 20 year old sweeping brush like Trigger's? If he keeps going that way his drill will last a lifetime.....
 
EddieM said:
Laser cross hairs on a pillar drill? I mean what is the point? A pillar drill by it's very nature allows slow precise alignment of the bit.
Click to expand...
SFK said:
Definitely agree on lasers not being useful or good at this price point.
Click to expand...

I cant see the point. But if you're going to have one, have it work properly.
 
This'll do - think of the time I'd save not having to change bits so often.

s-l1600.jpg


:ROFLMAO::ROFLMAO::ROFLMAO:
 
D

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
You must log in or register to reply here.
Sponsored Links

Similar threads

A
bench grinder
Replies
10
Views
1K
digdilem
D
C
Drill press standard
Replies
1
Views
924
wotan
W
I
basic pillar drill recomendation
Replies
4
Views
1K
opps
O
H
Pillar Drill questions
Replies
4
Views
979
hagz
H
T
Need New Corded Power Drill...but which one?
Replies
14
Views
9K
topgazza
T
Back
Top