I've had a look through the previous Tiger loop queries but can't find anything that addresses this.
By coincidence one of the search finds was a guy doing the same as me - that is replacing an external Camray oil boiler with Grants equivalent, but his question was different.
My problem is that Grants instruction book says that the Tiger loop must be mounted at the same level or above the burner - and Grant's technical help says the same as that is what the manufacturer, Anglo Nordic says. But go to Anglo Nordic's website and the installation instruction says "as close as is practical", and that is how mine has been for 25+ years in a box, along with the filter and fire lockout, immediately below the boiler casing. And it has always worked !!
Can anyone comment please.
Thanks
Rob
By coincidence one of the search finds was a guy doing the same as me - that is replacing an external Camray oil boiler with Grants equivalent, but his question was different.
My problem is that Grants instruction book says that the Tiger loop must be mounted at the same level or above the burner - and Grant's technical help says the same as that is what the manufacturer, Anglo Nordic says. But go to Anglo Nordic's website and the installation instruction says "as close as is practical", and that is how mine has been for 25+ years in a box, along with the filter and fire lockout, immediately below the boiler casing. And it has always worked !!
Can anyone comment please.
Thanks
Rob