Pyronix Deltabell Wiring

P

padstar

Joined
1 Dec 2019
Messages
907
Reaction score
36
Country
United Kingdom
I have installed the bells for the new alarm system but wont be installing the panel for a few weeks. Before i lose easy access to the bell is the below the correct method of cabling for a hard wired Pyronix Deltabell.

Cheers

Delta 1.jpg
Delta 2.jpg
Delta 3.jpg
 
Sponsored Links
I take it by the resistor ....it’s being connected to an enforcer wireless panel ?
 
Yes it is. I went for wired bells as they will shortly be hard to access. So I hope I will never have to get up to them again if they are wired correctly.

Does that look like its wired correctly in this case as I have a 2nd one to do out the back
 
As per this20200918_182321.jpg
You will need to watch power consumption if second wired bell box fitted. May need auxiliary power supply .
 
Sponsored Links
I thought you could add the resistor at the bell box. Looking at that diagram is it best just to run 1 of the cores to the 2nd "T" terminal and put the resistor at the other end in the main panel. Concerned I won't be able to get back up there when the guy comes to wire up the panel
 
Doesn’t make any difference .... you will still have to put on the battery link anyway ...
 
So that cant be done now?

Can the resistor be installed at any point in the line ie at the panel end or bell end? I could just run q core to each terminal in the bell then all options will be covered.
 
If it is difficult to gain access I’d personally disconnect the tamper switch. More hassle than it’s worth imo
 
Gibbies said:
If it is difficult to gain access I’d personally disconnect the tamper switch. More hassle than it’s worth imo
Click to expand...
How is this done and would that mean I wouldn't need to access it again and can move the battery jumper now?
 
padstar said:
How is this done and would that mean I wouldn't need to access it again and can move the battery jumper now?
Click to expand...
Oh I get it. Do away with the tamper = no need for the resistor. Good idea. If they want to disconnect the bell before robbing me then I am in trouble.

Can the battery switch now be done while I have access
 
Yes but it will likely drain the battery if your not powering it up for a while
 
D

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
You must log in or register to reply here.
Sponsored Links

Similar threads

A
Pyronix deltabell
Replies
6
Views
3K
Andrew williams
A
A
veritus 8 plus pyronix deltabell
Replies
4
Views
11K
sparkymarka
sparkymarka
S
Gardtec 800 wiring diagram for pyronix deltabell
Replies
2
Views
3K
stelow
S
3
Pyronix Deltabell Plus wiring
Replies
3
Views
5K
sparkymarka
sparkymarka
S
Pyronix Enforcer v10 hard wire a siren
2
Replies
29
Views
15K
sparkymarka
sparkymarka
Back
Top