Hi All, like to think I'm generally competent diyer, though regards to plastering have only ever patched up existing blown plaster. correction: 13 years ago dot dabbed drylined garage to room conversion and tapped all joints before pro plasterer called in , he was complementary of my work. Looking at YouTube as you do I'm thinking of taking on skimming these ways. Any encouragement from others or should I avoid? Thanks Simon
DIY skimming over walls, should I attempt?
- Thread starter kitessurfer
- Start date
-
- Tags
- diy plastering skim
Sponsored Links
D
dontbelieveawordofit
what trowel skills do you have?
have you got the tools?
have you had a price to skim it in.?
have you got the tools?
have you had a price to skim it in.?
No price yet to skim. Have few trowels, only ever taped plasterboard joints whilst drylining for garage conversion and patched up blown plaster. Willing to invest in some tools even if it goes pair shaped, would put down to experience ).
Sponsored Links
Call in the professionals.
I never even attempted to perform this form of art.
And I'm not kidding, they make it look easy, but it's not.
I never even attempted to perform this form of art.
And I'm not kidding, they make it look easy, but it's not.
I’d agree with the consensus, get someone in for this job.
Let them prep and skim for you.
There looks a couple of tricky bits there.
1 - a boarded up bit which looks below the level of the rest of the wall. That would need bringing level so probably a bit of Bonding. Even when you then skim with scrim over the join, there’s a chance it could crack a bit later on, with the different materials. There are more involved options that could make a better join.
2 - round the arch may be a little interesting if you want to use external corner beads or not.
For future -
I’m a DIYer and can generally plaster to a reasonable standard. I did a little course for a few days that taught the basics like skimming board. Note! It won’t make you an expert but will get you on the right path as a DIYer with some hands on experience. Ive since spent about 7 years renovating houses and with a LOT of help from plasterers on this forum since then. There’s a few pictures in my plastering album of stuff I’ve completed, from novice onwards.
so you can get there if you want.
Let them prep and skim for you.
There looks a couple of tricky bits there.
1 - a boarded up bit which looks below the level of the rest of the wall. That would need bringing level so probably a bit of Bonding. Even when you then skim with scrim over the join, there’s a chance it could crack a bit later on, with the different materials. There are more involved options that could make a better join.
2 - round the arch may be a little interesting if you want to use external corner beads or not.
For future -
I’m a DIYer and can generally plaster to a reasonable standard. I did a little course for a few days that taught the basics like skimming board. Note! It won’t make you an expert but will get you on the right path as a DIYer with some hands on experience. Ive since spent about 7 years renovating houses and with a LOT of help from plasterers on this forum since then. There’s a few pictures in my plastering album of stuff I’ve completed, from novice onwards.
so you can get there if you want.
D
dontbelieveawordofit
how is he supposed to ‘get there’ if he keeps hiring plasterers. bit of a contradiction.
Brilliant NickB, great to see you're post mate.
Brilliant NickB, great to see you're post mate.
If I go it alone I'll post what I'm upto here. Understand the issues and yes that board is slightly recessed into wall. The profile of the archway to the edge where a door frame could be isn't perpendicular, it's a terrible finish which even the old wall paper couldn't cover up. Thanks all for input , will get a price to skim in the background)
It looks a bit over smoothed and shiney imo.
Call the professionals in for the finishing coat or you'll regret it.
I'll give myself one wall, then maybe if it doesn't work out will call someone in.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
