help with a frame for angled doorway

S

swilli88

Joined

28 Aug 2020

Messages

158

Reaction score

8

Country

• 19 Oct 2020

• #1

I have been struggling with how to start and go about building the frame/door lining for a door that needs to have a notch taken out of it to fit under the stairs!

I iwould appreciate someone who might have done something simialr to run me through the steps.

Have a fairly good idea of how to do it from endless videos for standard door but would appreciate the input from a chippy on this non standard please!

 

Attachments

• 
  67062B4F-577E-46CC-852D-4A06E944C992.jpeg

  158.7 KB · Views: 298

mattylad

Joined

27 Apr 2008

Messages

9,436

Reaction score

894

Country

• 20 Oct 2020

• #2

Have you tried posting a picture?
If so, its not showing up.

 

S

swilli88

Joined

28 Aug 2020

Messages

158

Reaction score

8

Country

• 20 Oct 2020

• #3

Tried again to upload I think it’s there now

 

Attachments

• 
  F5C767B0-4D03-40AB-90FF-CA3961D1D573.jpeg

  182.8 KB · Views: 261
• 
  02FDE0C9-DC27-43A7-9B14-24497A9677A1.jpeg

  158.7 KB · Views: 253

D

Deleted member 174758

• 20 Oct 2020

• #4

Assuming that it is a flush door you will.need to relip the cut edge. If the door is frame and panel door you will need to carefully check how far into the top mortise and tenon joint you are cutting - further strengthening of the joint may be required

 

S

swilli88

Joined

28 Aug 2020

Messages

158

Reaction score

8

Country

• 20 Oct 2020

• #5

I anticipating having to restrengthen the door once trimmed yep