- Joined
- 11 Jan 2021
- Messages
- 5
- Reaction score
- 1
- Country
Hello all,
I've wired up per the excellent instructions here:
https://www.diynot.com/diy/threads/wiring-hive-on-worcester-bosch-greenstar-25-si-or-30-si.474730/
My Hive Receiver powers up and I've been able to complete the initial setup via the app, however the boiler never fires at the request of the Hive system.
I can see on the receiver that it's accepting the command to fire the boiler, hear the relay inside the Hive receiver click but the boiler never springs into life. I've tried it with and without the connection from Live (L) to Loop to Live (1) and it makes no difference.
My Boiler has a WB Digistat - a remote wireless thermostat. This remains in place and is still working - do I perhaps need to isolate or bypass this before the heating demand from the Hive will be accepted?
TIA.
I've wired up per the excellent instructions here:
https://www.diynot.com/diy/threads/wiring-hive-on-worcester-bosch-greenstar-25-si-or-30-si.474730/
My Hive Receiver powers up and I've been able to complete the initial setup via the app, however the boiler never fires at the request of the Hive system.
I can see on the receiver that it's accepting the command to fire the boiler, hear the relay inside the Hive receiver click but the boiler never springs into life. I've tried it with and without the connection from Live (L) to Loop to Live (1) and it makes no difference.
My Boiler has a WB Digistat - a remote wireless thermostat. This remains in place and is still working - do I perhaps need to isolate or bypass this before the heating demand from the Hive will be accepted?
TIA.