Shower holder replacement

Chubbs peterson · 25 Feb 2021

Hello,

looking for a bit of help. I’m trying to replace the shower head holder and am having difficulty removing the shower rail to do this.

I have removed the two end caps from the rail and can see there are no screws through the inside of it and I have tried to remove the gray cap on the front of the rail but it doesn’t seem to budge. I’ve attached pictures.

can anyone point me in the right direction? Any help much appreciated.

Alec_t · 25 Feb 2021

Have you checked for grub-screws below and above the end caps? Or perhaps the caps slide up and off?

Chubbs peterson · 25 Feb 2021

I can’t get the caps to move at all, I even tried pushing them in thinking they were a button. Had no luck! I’ll have a butchers for grub screws and see! Don’t think there was any though! Thanks.

Chubbs peterson · 25 Feb 2021

No grub screws that I could see

just pumps · 25 Feb 2021

If you are replacing it then take a multi tool saw to it until you find the fixings.

Alec_t · 26 Feb 2021

Have you tried rotating the bar about its long axis to see if it will 'unscrew' from the end caps?

Baths'N'Gas · 27 Feb 2021

The fixing are behind the grey plastic rectangles, pop them out with a thin screwdriver or Stanley blade

diynot

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Are you a trade or supplier? You can create your listing free at DIYnot Local

Shower holder replacement

Chubbs peterson

Attachments

Alec_t

Chubbs peterson

Chubbs peterson

just pumps

Alec_t

Baths'N'Gas

DIYnot Local

Similar threads