Conservatory Coupling Covers
- Thread starter seanoge
- Start date
Sponsored Links
- Joined
- 14 Nov 2014
- Messages
- 1,483
- Reaction score
- 365
- Country
Anything in this brochure similiar
https://www.windowwidgets.co.uk/downloads/brochure/?brochurepage=4
https://www.windowwidgets.co.uk/downloads/brochure/?brochurepage=4
Really need to know what profile system it is, beads look like WHS Halo rustique but could be wrong
Sponsored Links
- Joined
- 14 Nov 2014
- Messages
- 1,483
- Reaction score
- 365
- Country
What are you actually trying to achieve as a matter of interest? If its just to replace the covers then maybe ' trim ' would work, or if joining another frame, may be a different joiner but again use a 20/25/28 mm trim to cover the new joiner and the old ones so they all look the same
We have had no luck with our choice of Builder. He built a Bathroom extension whig was 8 cm out when he demolished inner wall. He also built the Dwarf walls for the Conservatory, and managed to break a sewer pipe. We found out too late, he'd gone Bankrupt. We had to demolish the wall to Install new Sewer & got a Blocklayer to rebuild the walls. I then built a DIY conservatory, put the inside Sill on and found a gap of 1 cm. at one end. The walls wern't square. Filled gap with Mastic but it looked terrible. Saw this Angle tape but it meant taking the Strips off. Nearly all damaged. Can possible glue them back on but would prefer new ones. Why are they so difficult to get?
Attachments
Last edited:
- Joined
- 14 Nov 2014
- Messages
- 1,483
- Reaction score
- 365
- Country
Where did you get the conservatory from as a matter of interest?
Angle tape works ok, use white 1or 2mm double sided glazing/security tape, much more forgiving than super glue with activator
A firm called Conservatories for U, Penzance. Went to them ...no help at all. The only other thing I vcan see is K2 on the installation Booklet, no hint of who made it. It's good , well made, but you'd think it would be possible to get Spares.
K2 is the make of the conservatory roof, K2 also had their own pvc profile but I believe this is now discontinued
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
