Can anyone tell me what type of connector this is and where I can get one and the metal pins to go with it please?
Identify this connector
- Thread starter dstill
- Start date
Sponsored Links
- Joined
- 28 Apr 2004
- Messages
- 7,461
- Reaction score
- 682
- Country
Not sure what its called but RS or CPC Farnell would be my first port of call
Looks like Molex 51021-0200 to me, this one most likely produced in Oct 2018. Would need straight on shot of the terminal holes to be sure though.
Pitch:
1.25mm(0.049’’)
Crimp Terminal:
50058, 50079
Mating wires:
UL1571 28/30/32AWG
Mating Parts:
51047 Crimp Housing, 53047 PCB Header, 53048 PCB Header, 53261 PCB Header, 53398 PCB Header
Can get all parts from CPC.
Pitch:
1.25mm(0.049’’)
Crimp Terminal:
50058, 50079
Mating wires:
UL1571 28/30/32AWG
Mating Parts:
51047 Crimp Housing, 53047 PCB Header, 53048 PCB Header, 53261 PCB Header, 53398 PCB Header
Can get all parts from CPC.
Brilliant, thank you. Here's a photo of the front and back.
Sponsored Links
- Joined
- 27 Apr 2008
- Messages
- 9,430
- Reaction score
- 893
- Country
There should be numbers on it, you may need a magnifying glass to read them.
Failing that, can you give a better quality picture from side on without flash and glare? Perhaps put it on a non shiny surface first, not a white one.
Failing that, can you give a better quality picture from side on without flash and glare? Perhaps put it on a non shiny surface first, not a white one.
Thanks guys, my photographic skills have always been appalling!!
I'll see if I can find any numbers on it if there are so many types out there.
I'll see if I can find any numbers on it if there are so many types out there.
Well after many futile attempts there's no way I can see the unnecessary numbers on the connector. Is there anywhere I could buy a small pack of mixed sizes that would likely have the one I need?
E
EddieM
If they're not molex, they probably are, try JST connectors.
- Joined
- 27 Apr 2008
- Messages
- 9,430
- Reaction score
- 893
- Country
I can tell you that its not Molex KK range.
Do they look like these? https://uk.rs-online.com/web/p/wire-housings-plugs/8201642/
You will also need to crimps and crimpers.
Do they look like these? https://uk.rs-online.com/web/p/wire-housings-plugs/8201642/
You will also need to crimps and crimpers.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
