Omega Petit alarm system problem

You pull the battery spade connectors of the battery.
Does your code work to silence then alarm or has it gone to 1234 ?
 
Sponsored Links
As soon as I removed the front panel, the keypad sounded continuously. To stop that I switched it off at the fuse box which silenced the panel but set off the outside bell.
I replaced the cover, switched the power back on and my usual code then worked to reset it to day mode.
 
So
Order new battery
Open cover do not turn off power
Disconnect battery by taking leads off old battery
Reconnect new battery red lead to red terminal and black lead to black terminal.
Put lid back on and reset with your user code.
If you turn off power and then disconnect battery you will need to completely reprogram your alarm system as it will lose its memory and you will require professional help in reprogramming.
This panel does not have a NVM backup.
 
Thank you so much...so it is not dangerous to work on it with the power on?
 
Sponsored Links
All electrics are dangerous, so you need to be careful.
The problem you have is if the control panel is totally turned off mains electric and battery you will lose the alarm programming.
If the panel defaults you will not be able to set alarm correctly.
 
Probably a silly question...it looks like I need a new 12v 3.4ah battery for my old alarm system. All the ones available locally are 3.2ah. Will that do?
 

Attachments

  • 20210430_190448.jpg
    20210430_190448.jpg
    108 KB · Views: 74
Thanks to everyone who gave me advice. New battery fitted and managed to re programme by following the manual. Cost £14 !!
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top