Gutter sealant use?

Joined
15 Dec 2008
Messages
577
Reaction score
9
Location
London
Country
United Kingdom
Hi

I'm going to be replacing some guttering on my house that is hard to reach. I'm wondering if, when I install the new guttering, I should use gutter sealant on all the joins because future access will be so difficult?

Is this poor practice? Should brand new gutters be water-tight if well installed.

I'll likely be getting the guttering from Wickes or another shed.

Cheers
 
Sponsored Links
Just test the gutter after you have installed it to make sure you have clipped all the joints properly and have proper runs.
No need to fill the joints with sealant.
 
I'm going to be replacing some guttering on my house that is hard to reach. I'm wondering if, when I install the new guttering, I should use gutter sealant on all the joins because future access will be so difficult?

No need for any sealant, all the fitting include the seals. Just ensure that the gutter can easily slide through the brackets as in expands and contracts with the weather, rather than being gradually 'walked out' of a fitting seal over time.
 
I've just had new guttering installed and speaking to floplast the manufacturer recommended spraying silicon onto the rubber seals before installation as it helps to prolong the life of the seal and rubber.
 
Sponsored Links
I've just had new guttering installed and speaking to floplast the manufacturer recommended spraying silicon onto the rubber seals before installation as it helps to prolong the life of the seal and rubber.

It certainly makes assembly much easier.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top