Worcester Greenstar Highflow 440 - add a Hive.

Joined
2 Jun 2021
Messages
5
Reaction score
1
Country
United Kingdom
Hi guys Im new here and just wanted to knw how to fit a hive system to my worecester boiler . I have the built in programmer on the boiler which will need to be taken out and a twin channel hive sysem installed so i can still boost the hot water . Has anyone done this and help would be great ie wiring diagram or video . Cheers
 
Sponsored Links
Page 49
file:///C:/Users/user/Downloads/Greenstar_440_and_550_CDi_Highflow_Combi_Installation_and_Servicing_Instructions.pdf

if using the hive you dont need LS for the room statas the hive has this inbuilt, if your boiler has a DT10 or DT 20 you will have to disconnect the ribbon between that and the pcb, be carefull not to connect the hive to the volt free thermostat connections , only use the 240v connections
 
Sponsored Links
I've sent it back to Amazon as I think it will be more hassle than it's worth. Cheers
 
just order the single channel hive very easy to install and will give you all the control of the heating via your phone etc, the HW is set at the boiler anyway and, the single channel hive is simply wired in as a room thermostat
 
Guys all fitted a all working great and hot water does work with this boiler. I used dual channel hive. Took a little bit of getting my head around the wiring.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top