- Joined
- 11 Jul 2015
- Messages
- 205
- Reaction score
- 0
- Country
Can this open for cleaning?
- Thread starter NotebookNewport
- Start date
Sponsored Links
C
Captain Nemesis
Have you tried pressing this down into the channel?
It may be that the little pegs will then ride under the lip of the channel allowing a greater opening angle and for the whole thing to slide along to gve access to the outside of the glass.
Watch your fingers.
A bit of WD40 the day before might be a good idea.
It may be that the little pegs will then ride under the lip of the channel allowing a greater opening angle and for the whole thing to slide along to gve access to the outside of the glass.
Watch your fingers.
A bit of WD40 the day before might be a good idea.
- Joined
- 11 Jul 2015
- Messages
- 205
- Reaction score
- 0
- Country
No movement that I could feel. Was thinking of squeezing the right hand ends together. Will take another look.
Thanks
Thanks
C
Captain Nemesis
Ah - yes - squeezing here so that those little pegs run inside the lip could be it.
Sponsored Links
Open fully and when the black sliding guide with the V notch meets and compresses the 2 bits you've arrowed you can then slide the whole lot over
- Joined
- 11 Jul 2015
- Messages
- 205
- Reaction score
- 0
- Country
Clever hey!
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
