Pipes under the bath disconnected

J

jimdave

Joined
13 Apr 2020
Messages
8
Reaction score
2
Country
United Kingdom
Good evening,

Water started gushing from above a ceiling hatch which is beneath my bath. As the picture shows, it looks like a pipe has come disconnected from another. I have tried putting the black pipe back inside the white pipe but it doesn't stay fixed, turning the collar doesn't appear to do anything.

It looks relatively straight forward to fix so I don't want to call a plumber, having said that I don't really know what to do. Is anyone able to tell me how I can reconnect these pipes?

Many thanks
 

Attachments

  • bathpipes.jpg
    bathpipes.jpg
    210.2 KB · Views: 265
Sponsored Links
Try undoing the white collar, slide it on the black pipe, put the shim and rubber seal on to the pipe, the same way round as they are now. Push the pipe in as far as it can go and then tighten the collar up as tight as you can. Remove all that hair first though.
 
Thanks for the response. I've tried that and that black pipe just pops out immediately. Perhaps I need a new collar?
 
As per @Mottie, that’s what’s needed, so if the pipe is coming back out straight away, it’s either too short, straining or you need it slightly tighter.
 
Sponsored Links
Check where the far end of the black pipe goes, it may have been allowed to move or a bracket has failed. The black pipe needs to be comfortably long enough to enter the white socket.
 
Thank you for all the answers.

The black pipe fits into the white one and goes right in, the only thing preventing me pushing it in further is the white pipe bends.

I assume that the black pipe should be quite secure in the white pipe and difficult to remove with the collar tightened but I can still quite easily pull it out.
 
From the limescale mark on the black pipe, it looks like it's not too short, so it must've moved somehow.
Can you trace it or does it go under the floor?
 
jimdave said:
I assume that the black pipe should be quite secure in the white pipe and difficult to remove with the collar tightened but I can still quite easily pull it out.
Click to expand...

Likely, there is something missing from where the seal is on the white part. The union should tighten up and squeeze the rubber part tightly around the black pipe.
 
OK, I think the issue is the rubber ring came out somehow, I've just felt around and found a rubber ring. I've put it where I assume it goes and things are a lot more snug.

Thanks for all the help.
 
Why is that water-filled white gutter under the bath?
 
Alec_t said:
Why is that water-filled white gutter under the bath?
Click to expand...
It's a container which the bodger who did the plumbing put there to collect the drips from the leaking waste, hoping that it wouldn't be bad enough to overflow.
 
Harry Bloomfield said:
Check where the far end of the black pipe goes, it may have been allowed to move or a bracket has failed. The black pipe needs to be comfortably long enough to enter the white socket.
Click to expand...


Please do that.

If the pipe is properly supported, it should not be able to pull itself out.
 
D

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
You must log in or register to reply here.
Sponsored Links

Similar threads

G
Bath Waste Pipe Leaking
Replies
2
Views
2K
gavman99
G
M
Leak in pipe under boiler
Replies
1
Views
239
ianmcd
ianmcd
H
Bath waste pipe leaking
Replies
2
Views
1K
Hugh Jaleak
Hugh Jaleak
S
Leaking bath tap
Replies
3
Views
6K
Whitespirit66
Whitespirit66
P
Bath waste pipe angle.
2
Replies
17
Views
24K
Blagard
B
Back
Top