Texecom Premier Elite 8XP 8 Zone - Speaker Not Working

meatalhead · 27 Jul 2021

Hello all,

I've currently got a Texecom Premier Elite 48, I've just added a CCB-0001 with 16 ohm speaker to the network. The speaker worked for a few weeks but doesn't work at all now (chime, fire or alarm), other speakers on the system all work fine. I've replaced the speaker and there's still no sound.

Is it possible to test if the expander has a fault before I buy a replacement expander? The zones connected to the expander all still work fine, just the speaker output is not working.

Thanks

sparkymarka · 27 Jul 2021

Have you made any programming changes since ? Local or by wintex ?
If so re check what areas the speaker is assigned to on that expander

meatalhead · 27 Jul 2021

No changes unfortunately, all my expanders are zone A

Handymanjo · 27 Jul 2021

Blown speaker ?
Have you got multimeter to check speaker resistance.

meatalhead · 28 Jul 2021

The speaker seems fine and I've swapped out for one that was working on another expander.

Something that I can't understand, the speaker sounds when the system arms/ disarms, but nothing on chime, fire or alarm. As far as I can tell it's set up correctly in Wintex, does anyone know of an option that would mute chime, fire and alarm on one expander?

I've also tried changing the position in the network in case that was the problem but it made no difference, I think I'll have to buy a new expander and see if that fixes it

secureiam · 28 Jul 2021

Speaker tones

meatalhead · 28 Jul 2021

I've just double checked speaker tones, everything's turned on. It's very odd because it's only one extension speaker that's not making all the sounds, but at the same time does make some (which is why I'm not convinced the expander is broken)

sparkymarka · 28 Jul 2021

Are you sure you are looking at the correct expander on wintex ?

meatalhead · 29 Jul 2021

Problem solved! I'm not sure why but my Wintex and device were completely out of sync, I removed the saved file from Wintex and received the data from the panel on a fresh file. This let me set up the expander correctly. Thank you all for your help.

diynot

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Are you a trade or supplier? You can create your listing free at DIYnot Local

Texecom Premier Elite 8XP 8 Zone - Speaker Not Working

Similar threads