Moving an OIL boiler

Joined
6 Aug 2019
Messages
56
Reaction score
1
Country
United Kingdom
Evening All.

As part of an extension (self) build, my boiler, which is oil fired, needs moving.

Am I able to do this myself?

It is a standard worcester danesmoor oil boiler (non condensing, year 2000) The piping is very simple, and not being moved very far, so I could easily do that myself. The oil supply pipe would then need to be rerouted - again very easy.

The bigger job is the flue, which currently goes up the chimney. A new flue will be needed, which goes up the side of the house. As it's not a condensing boiler, again I think that makes things easier as just a bog standard new flue can be used.

Is this doable, or is a professional essential? Will building control sign off on my extension if I do it myself or does it need certifying?

I know someone will suggest getting a new boiler as this is an old one, but I've read that these older ones last forever and are very simple so that is an expense I could do without.

Many thanks.
 
Sponsored Links
A non condensing boiler would not comply so think in this case you would have to replace it

As you are not Oftec registered you would have to notify building control in advance (no probs as they presumably are already involved) and you will most likely have to get an Oftec engineer to commission it and issue his CD11. I have done this a few times but am now Oftec registered so have no need to
 
A new installation I could understand making it compulsory to upgrade to a condensing boiler, but surely moving it a few feet across the floor does not trigger a mandatory upgrade?..!
 
I think a removal and reinstallstion is classed as a new install. Otherwise everyone would be fitting second hand boilers to circumvent the regs
 
Sponsored Links
The issue you will have is any decent engineer won’t recommission your old boiler as it won’t comply, and by that you wouldn’t have the required paperwork to satisfy building control.
 
Its going to have to be a new boiler and will have to be commissioned , by an OFTEC engineer, or keep the original boiler in place until it fails .
 
Many thanks for the replies.

Just to play devil's advocate here then, how far would it have to be moved before it is classed as a new install? Would a 5cm move result in having a new boiler? Is it changing the pipework that is the trigger? Or the flue? What if the pipework was changed but the boiler wasn't even moved? When is the line crossed?

Thanks
 
The requirement to significantly alter and relocate the flue would do it for me, but the combination of having to re-do everything definitely makes it a new install
 
I know a lot of folks who have moved a boiler and said nothing about it,not strictly legal but still been done. The main prob is the flue but if it’s not a combi then put in a heat only houndsfield they ain’t big bucks and good boilers. Bob
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top