Wonder If I can get some help.
This is my master socket sited on a coat, shoe cupboard ( right under Consumer unit ) as we enter the house. When we bought the house there was a Tel Extension socket in a good few rooms. These have been blanked off as we decorated the house. As you can see on one attached photo the wiring for extensions seems to have been a DIY affair using terminal blocks. We now just have 2 sockets left. One is in the down stairs Lobby where the main telephone is. The other is in small down stairs bedroom the other side of the Cupboard which we use as an office with PC and Router. The routers plugged into this and works ok. You'll see that there is a socket plugged into the master socket after the filter that has another plug into that, but there's no plug in the filter for Modem. The Plug that's in the back of this "Connector"? seems to unclick but wont pull out. This has been the way it was since we bought the property. I want to start tidying things up and wonder if I can get the answers to following questions
What type of master socket is that and can I upgrade the face plate to any advantage.
Should my router extension socket be plugged into the ADSL plug on the filter. Given the way things are, how do Identify what wire goes to bedroom / router socket
Do I need that plug that plugged into the filter.
This is my master socket sited on a coat, shoe cupboard ( right under Consumer unit ) as we enter the house. When we bought the house there was a Tel Extension socket in a good few rooms. These have been blanked off as we decorated the house. As you can see on one attached photo the wiring for extensions seems to have been a DIY affair using terminal blocks. We now just have 2 sockets left. One is in the down stairs Lobby where the main telephone is. The other is in small down stairs bedroom the other side of the Cupboard which we use as an office with PC and Router. The routers plugged into this and works ok. You'll see that there is a socket plugged into the master socket after the filter that has another plug into that, but there's no plug in the filter for Modem. The Plug that's in the back of this "Connector"? seems to unclick but wont pull out. This has been the way it was since we bought the property. I want to start tidying things up and wonder if I can get the answers to following questions
What type of master socket is that and can I upgrade the face plate to any advantage.
Should my router extension socket be plugged into the ADSL plug on the filter. Given the way things are, how do Identify what wire goes to bedroom / router socket
Do I need that plug that plugged into the filter.