No Joist End - How do I Support Floor?

Joined
22 Jan 2021
Messages
95
Reaction score
1
Country
United Kingdom
Hi All,

Putting in new joists (suspended timber ground floor) and with combination of 400/450 centres have managed to keep it all relatively uniform. However there is a return no joist lands on and therefore will be no support for the floor (pic attached). What's the solution to this to get something in there that will support floor ends?
 

Attachments

  • 20211008_161038.jpg
    20211008_161038.jpg
    208.4 KB · Views: 202
Sponsored Links
Anything I can do with the joists e.g. nogging across the joists and then run a short piece from wall plate to nogging or would that be classed as a trimmed joist?
 
Fix a noggin across from the end of the left joist to the right joist and then fix a bit of joist from the noggin through past the return to the back support wall
 
Sponsored Links
You have cocked up grizzy! You should have let the fire place support come over to the next full joist and then added an 18" piece. You can now put a noggin in and use a small piece suitable down the side of the chimney.
 
Thanks tony1851, that was the solution in my head, just wondered if BC would be happy with it i.e. it's something commonly done. Not sure if small bit of timber along the wall becomes a trimmed joist and you need additional support etc like trimmer joists for openings.
Catlad - not quite sure I follow suggestion. Is it to extend wall plate timber is resting on out to next joist beyond the sleeper wall supporting it?
 
Not sure if small bit of timber along the wall becomes a trimmed joist and you need additional support etc like trimmer joists for openings.

On this small scale it doesn't matter; no need to double-up or anything.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top