Old TV remote control needs some attention

Joined
3 Aug 2016
Messages
48
Reaction score
1
Country
United Kingdom
I have this old remote which I think has recently been a victim of the kids spilling something on it. As you'll see from the video, I have tried quite a few things to get it working (with some success), but now some of the topmost buttons no longer work. Hoping someone can provide some useful tips before I have to get a universal remote (don't need a new TV ;)):


Thanks in advance
 
Sponsored Links
try washing the back of the flexi rubber bit with washing up liquid and an old toothbrush to clean the black contacts on the back of the flexi bit. wash the housing as well to get rid of spilled liquids. I always just use isopropyl alchohol to clean the circuit board pads
 
There are many videos on YouTube that lead you through the steps you can try before you give up and buy a replacement from eBay.
 
Sponsored Links
try washing the back of the flexi rubber bit with washing up liquid and an old toothbrush to clean the black contacts on the back of the flexi bit. wash the housing as well to get rid of spilled liquids. I always just use isopropyl alchohol to clean the circuit board pads

Thank you, will give those a go.

There are many videos on YouTube that lead you through the steps you can try before you give up and buy a replacement from eBay.

Thanks, will take a look.

get new kids.

:LOL:
 
Hi! I've had to rejuvenate an old remote, and after trying the usual tips, cleaning with ipa, rubbing the conductive pads with a pencil, and reading that conductive paint soon loses its effectiveness, (so saved some money there...) I found the cheapest and so far OK way (from YouTube) is to glue pieces of baking foil to the worn key pads. You have to try to scratch off some of the coating on the pads first to give the glue some key, then I tried superglue but that didn't last and then Evostick which sofar so good.
Also, you might not have ipa, but do you have any meths or even nail varnish remover as you may still have some dried up liquid on the power button tracks that your contact cleaner isn't removing.
 
Last edited:
Links in this post may contain affiliate links for which DIYnot may be compensated.
Hi! I've had to rejuvenate an old remote, and after trying the usual tips, cleaning with ipa, rubbing the conductive pads with a pencil, and reading that conductive paint soon loses its effectiveness, (so saved some money there...) I found the cheapest and so far OK way (from YouTube) is to glue pieces of baking foil to the worn key pads. You have to try to scratch off some of the coating on the pads first to give the glue some key, then I tried superglue but that didn't last and then Evostick which sofar so good.
Also, you might not have ipa, but do you have any meths or even nail varnish remover as you may still have some dried up liquid on the power button tracks that your contact cleaner isn't removing.

I have some acetone which I'll try. I managed to have some luck for a few minutes where the buttons started working before it went back to behaving badly


Thank you, might just have to go with this option soon

This. ^^^

When a couple of the buttons on my Panasonic remote started playing up, I just bought a new one (specific one, not a universal remote) for about six quid off eBay. That was a couple of years ago and it's still going fine.

Thanks, I think I will most likely head down this route now that it's been pointed out how cheap they are
 
Links in this post may contain affiliate links for which DIYnot may be compensated.
It's just that if you can patch up your old remote with a little effort and baking foil, and glue, you save not only your money but something from ending up in landfill.
 
Thanks all, I tried my best to revive the remote but I could see the PCB tracks geting exposed but no luck with getting the buttons working. As suggested in the thread, ordered a matching remote from ebay
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top