Are these meter tails labelled correctly? *PIC*

Sponsored Links
Links in this post may contain affiliate links for which DIYnot may be compensated.
Links in this post may contain affiliate links for which DIYnot may be compensated.
You should look at what else that seller is selling.
Like old crap like batteries (untested) for lots more than they are worth..

First thing on the list is good though, a book on "how to make money by mail order" lol
 
Sponsored Links
EFLImpudence said:
You or your electrician. Why bother? The colours don't matter
Click to expand...
technically there's more to it than just the colours. Those old 25mm red and black tails have less strands in them - meaning they are hard to bend

The modern ones have more strands and are thus more flexible
 
boolie said:
technically there's more to it than just the colours. Those old 25mm red and black tails have less fewer strands in them - meaning they are hard to bend
The modern ones have more strands and are thus more flexible
Click to expand...
Different type of cable - not related to the size.


Of course, having now seen the consumer unit, you might only have a 60A main fuse (the 100A label is just the maximum) which means 10mm² 'tails' would be sufficient in which case the earthing conductor need only be 5mm² (using 6mm²).

Just because someone has fitted oversized tails does not mean the earthing conductor has to be larger than the required size.
 
What can I sensibly do myself before getting a sparky in?

You get the gist of the house. It's old. 11 rooms (that includes the garage). 4 of which are bedrooms

Is there a way I can do some testing myself? i.e. thinking about hiring a machine - would you guys be able to advise me on how to use it? Ive looked in one of the light pendants that was flickering and the cable is a silver stranded type. I opened the switch and refitted the terminals and it stopped flickering

As with most things in life the major issue is cost, I cant afford to get a sparky in to rewire the whole house. I'm hoping I can do the legwork myself (chasing and lifting floorboards + rewire any dodgy bits and do some testing on a hired device). Then get a sparky in to install CU and sign off.

PXL_20210531_175426291 (1).jpg
 
boolie said:
thinking about hiring a machine - would you guys be able to advise me on how to use it?
Click to expand...
That is totally unrealistic.
If you don't know how to use it and what the results mean, it's pointless hiring it.

boolie said:
I'm hoping I can do the legwork myself (chasing and lifting floorboards + rewire any dodgy bits and do some testing on a hired device). Then get a sparky in to install CU and sign off.
Click to expand...
Another very bad idea.
If you call up an electrician and say 'I have just rewired bits of my house and want you to now install a new CU', then you will either get told where to go, or you will end up paying a very large amount for the whole installation to be meticulously inspected and tested, all of the faults fixed (including things you did which were wrong), and then a new consumer unit installed.

boolie said:
What can I sensibly do myself before getting a sparky in?
Click to expand...
Nothing.
If you want to remove floorboards and whatever else then you must ask the electrician doing the work what's required.
Until the installation has been inspected and tested, there is no way to know what, if anything, is needed.
 
With all due respect: I would suggest that the fact that you are having to ask implies that you will not be able to do what you want.
 
If you haven't moved in properly yet (ie the place is still bare boards, needs decorating etc etc) then now is the time to get a few electricians in to quote for the job. You might save some money if you are available to be said electricians labourer/mate (many parts of the job are way quicker/easier with 2) but that's probably as far as you can go with your current knowledge.
 
oldbutnotdead said:
If you haven't moved in properly yet (ie the place is still bare boards, needs decorating etc etc) then now is the time to get a few electricians in to quote for the job. You might save some money if you are available to be said electricians labourer/mate (many parts of the job are way quicker/easier with 2) but that's probably as far as you can go with your current knowledge.
Click to expand...
I did get a ball park quote - I didnt want him to waste his time because I cant afford it so asked him to quote over the phone. £4500 (which could change if he did a proper quote). He quoted for a full rewire. Sent him a few pics and explained how old the house is ~120 years old

To be frank I cant afford it
 
I am sure someone would answer your questions but I think it would take a very long time.

It's just that there would be too much to explain - i.e everything.
 
EFLImpudence said:
I am sure someone would answer your questions but I think it would take a very long time.

It's just that there would be too much to explain - i.e everything.
Click to expand...
OK thanks for that.. from my perspective hiring a machine for a week costs £60. 60 squid isn't small change but is very affordable

Worst case scenario, I dont have a clue how to use it and end up wasting £60 - meh. And maybe get laughed at on this forum - meh

A decent scenario - I identify some circuit faults and maybe can fix them! I haven't 100% decided yet but am seriously considering hiring a test machine.
 
OK I'm gonna start my questions and watch the bombs explode! :cautious:
  1. Which is the easiest MFT to use? is this a good one Megger MFT1721 ?
  2. Do you guys know of any good tutorials? I've found a a decent vid on youtube
 
D

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
You must log in or register to reply here.
Sponsored Links

Similar threads

S
Stripping meter tails
2 3
Replies
30
Views
14K
333rocky333
333rocky333
J
tails not labelled
Replies
10
Views
1K
thetman
T
C
Tails and Main Earth
Replies
8
Views
2K
C&GStudent
C
N
16mm meter tails & DNO
Replies
7
Views
3K
kevindgas
K
Greenie9657
Meter Tails sizing.
2
Replies
15
Views
2K
Cabbyfan
Cabbyfan
Back
Top