Texecom Premier Elite - Home Assistant Integration

JonnyMercUK said:
Hi @daern ,

I’m a complete newbie to HA but wondered if you could help. I’ve followed the instructions as best I can but stuck now. The logs in texecom2mqtt are fetching all the areas and zones but what do I do from here?

The least I need to do is get arm and disarm on the dashboard.
Click to expand...
Sorry, just noticed this, so sorry for the delay. If you're not already up and running, I'd recommend the thread on the HA forums for support on this:
https://community.home-assistant.io...m-panel-and-mqtt-integration-with-ha-support/

It should be pretty straight forward - once you have the integration setup with the correct configuration, the zones and areas should just appear in Home Assistant as entities with no additional work needed.
 
Sponsored Links
D

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
You must log in or register to reply here.

Similar threads

M
Texecom Premier Elite 88 with Smartcom
Replies
2
Views
1K
markkee
M
Skylar
Texecom Connect SmartCom Setup Issue - Premier Elite 64-W
2
Replies
15
Views
15K
secureiam
secureiam
C
Powering off Texecom Premier Elite and avoiding siren going off
Replies
4
Views
331
sparkymarka
sparkymarka
D
How to reset Texecom Smartcom
Replies
5
Views
12K
secureiam
secureiam
A
Texecom premier Elite PS fault
Replies
8
Views
6K
secureiam
secureiam
Back
Top