It has really bad virbration. Changed the shockers a bit better. Almost walks across the room still. Going to change the main springs next. The drum seems really easy to move from side to side compared with my friend's Hotpoint, Thanks
Hotpoint wm52
- Thread starter lookinn
- Start date
Sponsored Links
Have you solved your problem. The springs usually do not need changing unles they snap which is not uncommon.Have you checked the lower counterweight for loose bolts.If these are loose long enough it can fracture the tub worth a check.
Have a look at the base of the machine where the shock absorbers bolt on. Sometimes the steel base cracks near the bolt holes. If the base is OK and the concrete blocks are not loose it will either be drum bearing or drum spider failure.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
