hot water cylinder

andrea4g · 13 Mar 2007

hello

i have a hot water cylinder that needs replacing. the water is heated by the immersion, there is no central heating. i cant find a tank with just a cold feed and a hot supply with a hole for a immersion. the only ones i can find is the ones with the central heating connections. can i by one of these and blank of the holes?
if so where from?

many thanks chris.

HarrogateGas · 13 Mar 2007

You can fit one with a coil for central heating connections and there is no need to cap off the connections.........the water is heated indirectly so no water will come out!

gas4you · 13 Mar 2007

You need to ask for a 'direct cylinder' The one you describe with central heating connections are called 'indirect'.

You can get these from any good plumbers merchant

corgiman · 13 Mar 2007

gas dont you find that direct cyls are hugley more expensive than indirect?

I do thats why I do what harrow suggested

gas4you · 13 Mar 2007

Yes corgiman, but i was just letting op know what to ask for as he said he couldn'y get one

andrea4g · 13 Mar 2007

thank you all for your advice thats sorted that cheers

stevejac · 14 Mar 2007

gledhill will build you what ever spec you want they are in Blackpool thats where i get mine made at.

diynot

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Are you a trade or supplier? You can create your listing free at DIYnot Local

hot water cylinder

Similar threads